Arag BRAVO DSB Manual do Utilizador descarregar pdf (Página 12)

8 MAintenAnce / diAgnostics / rePAirs

- Onlyuseasoftdampclothforcleaning.

- DONOTusedetergentsoraggressivesubstances.

ProBLeM cAuse soLution

The ON light does not switch on

Wrong connections Check cabling connections

Computer switched off

Push the start up button on the

computer / monitor

The LED indicating pressure

(

PRESS) ashes

Wrong connection Check transducer connection

The transducer does not work Replace the transducer

The LED indicating pressure

(

PRESS) does not switch on

The transducer wire is not

connected

Check cabling connection

The transducer does not work Replace the transducer

The computer / monitor does not

visualise the signal of

• speed (

SPEED)

• lling (FILL)

• pressure (PRESS)

• rpm (RPM)

coming from the simulator

Wrong connections Check cabling connections

Wrong selection of the function Check the position of the switch

The regulation values are at

minimum

Turn the control knob clockwise

Conguration of computer /

monitor

Check that the computer / monitor has

the function requested and/or that it is

correctly congured

The computer / monitor does not

visualise the signal of :

• ow (

FLOW)

coming from the simulator

Wrong connections Check cabling connections

Wrong selection of the function Check the position of the switch

The regulation values are at

minimum

Turn the control knob clockwise

Conguration of computer /

monitor

Check that the computer / monitor has

the function requested and/or that it is

correctly congured

The

FEEDBACK ON

switch is in the ON position

Turn the FEEDBACK ON

switch to OFF (lower the lever)

The computer is not able to carry

out automatic regulation

Wrong connections Check cabling connections

Conguration of computer /

monitor

Check that the computer / monitor

is set to automatic mode

The

FEEDBACK ON

switch is in the OFF position

Turn the FEEDBACK ON

switch to ON (lift the lever)

Wrong position of the switches

•

SPEED

•

FLOW

Move the switches

•

SPEED

•

FLOW

down

Make sure no regulation alarm is

active on the display of

Bravo 180 - 300S - 400

Increase or decrease speed

(

SPEED) until the light goes off

Tab. 6

9 technicAL dAtA

• Size 130 x 370 x 450 mm

• Weight 4750 gr

• Power supply 9 ÷ 15 Vdc

• Current absorbed 0,2 A to 12 Vdc

• Low battery signal 10,5 Vdc

• Working temperature

0° ÷ 50°C

(+32 ÷ 122 F)

• Storage temperature

-20° ÷ 70°C

(-4 ÷ 158 F)

Tab. 7

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Arag BRAVO DSB Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Arag BRAVO DSB